The UPM100 is a compact power monitor that can be attached in industrial machinery etc. and measure instantaneous apparent power, instantaneous active power, instantaneous reactive power, instantaneous rms voltage and rms current of each phase, active energy, reactive energy, regenerative energy, apparent energy and instantaneous power factor.
The UPM100 can measure one of the single-phase 2-wire, single-phase 3-wire, three-phase 3-wire or three-phase 4-wire.
The UPM 101 measures the secondary side line of the existing CT by using a dedicated CT.
Various electric power and energy can be monitored by using a wide array of measuring functions.
Communication via RS-485 communication is possible.
The UPM100 and UPM101 is compact and can be mounted on DIN rail or a wall.
Good readability is realized by using a large LED display. In addition, since the 6-digit value with the decimal point which can move by key operation on a front panel is displayed, detailed electric power and energy can be checked.
|Phase and Wire Type||Single-phase 2-wire, singlephase 3-wire, three-phase 3-wire, three-phase 4-wire|
|Rated Input Voltage||220V AC*1, 440V AC Either 127V AC or 277V AC for three-phase 4-wire|
|Allowable Input Voltage||1.2 times of rated voltage (continuous)
1.5 times of rated voltage (for 10 seconds)
|Rated Input Current||UPM100：1A AC, 5A AC
UPM101：5A AC (primary-side current of the dedicated CT)
|Allowable Input Current||1.2 times of rated current (continuous)
Twice of rated current (for 10 seconds),10 times of rated current (for 3 seconds)
|rms voltage and current for each phase||UPM100：±1.0% FS
|Option output||Pulse Output of Electric Energy : 2 points|
|Communication Protocols||PC-link (with or without checksum), MODBUS (ASCII, RTU)|
|Transmission Distance||Approx. 1.2 km max. (Using twisted-pair cable with 24AWG shield)|
|Baud Rate||19200, 9600 or 2400 bps|
|Maximum Number of Connected Units||31 (units that can be connected to PC or other device in multi-drop connection)|
|Power Monitoring Package||SMARTDAC+GM(Power monitoring package), PR970|
|Power Supply||85～264V AC 45～65Hz|
|Consumed Power||Maximum 7VA (with display function)|
|Outline / Wight||106 x 100 x 60mm / Approx. 400 g|
*1: When "optional measuring function" is specified.
*2 Reactive energy LEAD and LAG are integrated. When "with pulse output" is specified, active energy pulse and reactive energy pulse are outputted. However, either LEAD or LAG is output for reactive energy pulse.
Kyushu Mitsui Aluminium uses the UPM100 Power Monitor for its overall factory operations, and the DX1000 Paperless Recorder for its high-purity aluminum refining furnaces.
Improving manufacturing efficiency demands constant action - from uncovering operational waste to identifying areas for continuous improvement. Namely, we must always pursue a cycle of visualizing, analyzing, and solving energy saving challenges.
- (2.4 MB)
- (3.9 MB)
- (7.1 MB)
- (3.3 MB)
- (4.0 MB)
- (659 KB)
- (3.5 MB)
- (2.0 MB)
- (718 KB)
- (12.0 MB)
- (1.0 MB)
- (2.6 MB)
- (1.0 MB)
- (2.0 MB)
Looking for more information on our people, technology and solutions?